Please confirm your preference
Americas
Europe, Middle East, Africa
Asia Pacific

Epoxy Systems for Prototypes

Our range of epoxy resin systems for prototyping suit VARTM, hand lay-up, and LP-RTM processing. These prototyping resins produce composites with mechanical properties comparable to those of our fast-cure HP-RTM systems.

For help developing your prototype faster, partner with us through the Transportation Research and Application Center (TRAC) at our Duisburg, Germany plant. Send a request using the "Contact Us" button on this page.

Prototyping


EPIKOTETM Resin SystemsCuring Conditions  
Time[min]Temp[oC]Glass Transition
Temp [°C] (DSC Midpoint)
Process
EP TRAC 06110
EK TRAC 06150
30 min + 60 min postcure50oC + 60oC + postcure 130oC110oC + 120oCLP-RTM
 Remarks: Short cycle time, very long resin injection window, excellent thermal and mechanical properties. This system is preferably combined with Internal Mold Release Heloxy Additive TRAC 06805
EP TRAC 06150
EK TRAC 06150
30 min + 60 min postcure50oC + 60oC + postcure 130oC110oC + 120oCLP-RTM
 Remarks: Comparable mechanical properties as with the fast-cure HP-RTM systems can
be achieved.
EP MGSTM RIMR 935
EK MGSTM RIMH 936
120 min + 60 min postcure80oC + 90oC + postcure 130oC110oC + 120oCVARTM Hand lay-up
 Remarks:Low viscosity infusion resin system for processing of woven and non-crimp multiaxial fabrics. 2h pot-life at 30oC.
Welcome to Hexion eSecurity
Your platform for receiving secure content.
If you've received a notification, you can validate its authenticity by going to our validation page.