| EPIKOTETM Resin Systems | Curing Conditions | | | |
|---|
| Time[min] | Temp[oC] | Glass Transition
Temp [°C] (DSC Midpoint) | Process | Typical Applications |
EP TRAC 06170
EK TRAC 06170
HA TRAC 06805 | 45sec - 3min | 115- 145°C | 120°C - 135°C | RTM
LCM | Frame parts, Chassis parts, Floor panels, Firewalls, ... |
| | Remarks:Very short cycle time, long resin injection window, excellent thermal and mechanical properties. This system is preferably combined with internal Mold Release HELOXY Additive TRAC 06805. |
EP TRAC 06000
EK TRAC 06130
HA TRAC 06805
| 90 sec-3 min | 115-130 °C | 110-120°C | RTM
LCM | Frame parts, Chassis parts, Floor panels, Firewalls, ... |
| | Remarks: Very short cycle time, long resin injection window, excellent thermal and mechanical properties. This system is preferably combined with Internal Mold Release Heloxy Additive TRAC 06805. |
EP TRAC 06150
EK TRAC 06150
HA TRAC 06805 | 5-10 min | 110-120 °C | 110°C - 120°C | RTM
LCM | Frame parts, Chassis parts, Floor panels, Firewalls, ... |
| | Remarks:Very short cycle time, long resin infection window, excellent thermal and mechanical properties. This system is preferably combined with internal Mold Release HELOXY Additive TRAC 06805. |
EP TRAC 06110
EK TRAC 06150
HA TRAC 06805
| 10-20 min | 80-120°C | 110-120°C | RTM
LCM | Monocoque structure of passenger cars, large chassis parts, closure of trucks, ... |
| | Remarks: Short cycle time, long resin injection window, excellent thermal and mechanical properties. This system is preferably combined with Internal Mold Release Heloxy Additive TRAC 06805. |
EP TRAC 06605
EP TRAC 06612
EK TRAC 06624
HA TRAC 06807
| 2-4 min. | 140-150 °C | 115-120°C (DMA Peak) | SMC | Seat structure, Floor panels, Firewalls, hood inners, … |
| | Remarks: Low viscosity styrene-monomer free SMC resin with excellent Impregnation of Carbon and Glass fibers. Short cycle time, good surface quality and mechanical properties. This system is preferably combined with
Internal Mold Release Additive Heloxy Additive TRAC 06807. |
EP TRAC 06605
EP TRAC 06606
EK TRAC 06612
EK TRAC 06624
HA TRAC 06807
| 5 min -8 min | 140- 150°C | 118°C - 123°C | SMC | Seat structure, Floor panels, Firewalls, hood inners, … |
| | Remarks: Higher Tg Styrene-monomer free SMC resin with excellent impregnation of Carbon and Glass fibers. Short cycle time, good surface quality and mechanical properties. This system is preferably combined with Internal Mold Release Additive Heloxy Additive TRAC 06807. |
EP TRAC 05475
EK TRAC 04976
EKCAT TRAC 04976
| 30 min-120 min postcure | 90-160 °C | 140 °C | FiWi Pultrusion | Hollow parts, beams, … |
| | Remarks: Versatile pot life, system combines good mechanical and thermal properties. |
